imer-logo

PROGRESSIVE CAVITY PUMPS

Welcome to a new day for pumps. IMER’s diverse and wide range of pumps is even more versatile than ever before with our wide range of accessories for each and every machine. Every IMER machine has been carefully engineered to handle a multitude of applications, providing your operation more opportunity to use the pumps daily, increasing your ROI. Pumping of grouts, self-leveling underlayments, spraying fireproofing, mortar and stucco setup, low volume shotcrete are just the beginning of the applications IMER pumps were engineered to tackle – and to outperform competitive pumps that only handle one type of pumping application. Trust the brand with years of experience, engineering excellence, and superior quality.

​MIGHTY
SMALL 50


PROGRESSIVE CAVITY PUMP

SPRAYING & GROUTING PUMP

The Mighty Small 50 Performs on the Most Challenging Job Sites Across America  
The Mighty Small 50 is a very portable multi-purpose pump and spray machine. It can be configured with many different accessories for the application. Whether it is pumping grout into forms, on a bridge deck repair project, spraying fireproofing on a high-rise building, or filling blocks with grout, our pumps have a resumé of success. It is the right solution when you need help with a tough pumping application.

Model # 1106344
TECHNICAL SPECIFICATIONS

STANDARD EQUIPMENT

  • 1.75 hp 110V motor is 100% duty cycle for continuous use
  • IMER’s exclusive inverter – this technology allows the Small 50 to operate on 85 to 135 volts – will perform flawlessly on a 6000-watt generator
  • Stainless steel hopper
  • Rotor and stator D8 1.5
  • Inverter driven control panel
  • Electric remote control cable
  • Pressure gauge for material pressure
  • Accessory toolbox

OPTIONAL EQUIPMENT

  • Dual diaphragm compressor – Part # 1107546
  • Mortar, stucco and fireproofing gun kit – Part # 1107005
  • Vibrating hopper for tuckpointing – Part #1107015​
  • Vibrating screen for bulk sand mixes – Part # 1107548​
  • Pipe hook for block, form and door jamb filling – Part #1107570
  • Paint and fine coatings gun kit – Part # 1107010
  • Grout injection kit – Part # 1107006
  • Tuckpointing gun kit – Part # 1107504
  • 25 mm (1”) material hose – Part # 1107525
  • 5’ overhead wand – Part #1107549
MIGHTY SMALL 50 SPECS
Application Chart
Please fill out this form
so we can get 
you an
accurate quote.
Thank You 
Mighty Small 50
I'm interested in a Quote for the Following:
How did you find us? *

​STEP-UP 120


Single Phase

SPRAYING & GROUTING PUMP

Step Up to IMER’s Step-Up 120 Series Spray and Grout Pumps
When you need more power to push through stiffer material, or you just need more volume, then look no further than the Step-Up 120 series of pumps. The IMER Step-Up 120 is a towable but very compact sized pump suited for very unique pumping situations and environments. These pumps are extremely versatile. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofings along with many other materials.

Model # 1106180 | 220V/60Hz, 3 HP,  Single Phase

TECHNICAL SPECIFICATIONS

STANDARD EQUIPMENT

  • Inverter Control panel
  • 66’ power cord
  • Remote control ready
  • 3 hp single phase 100% duty cycle motor
  • IM25L rotor/stator
  • Tow kit
  • Grate for premixed materials
  • Accessory toolbox

OPTIONAL EQUIPMENT

  • Dual diaphragm compressor – Part # 1107602
  • Non-towing wheel kit – Part # 1107633
  • Step up 120 pan mixer – Part # 1107596
  • Spin 30 continuous mixer with iDust grate – Part # 1106152
  • 33’ x 35mm hose – Part # 1107528
  • 50mm to 35mm material hose reducer – Part # 1106178
  • Vibrating grate – Part # 1107592
  • 120’ remote control – Part # 1107574
  • 2L6 rotor/stator kit – Part # 1107088
  • Spray gun 35mm male – Part # 1107577
  • Pintle tow ring – Part # 1107161
  • 5’ overhead wand – Part #1107549
  • 16’ x 35mm male to 25mm male hose – Part #1107074
Application Chart
Please fill out this form
so we can get 
you an
accurate quote.
Thank You 
Mighty Small 50
I'm interested in a Quote for the Following:
How did you find us? *

​STEP-UP 120


Three Phase

SPRAYING & GROUTING PUMP

Step Up to IMER’s Step-Up 120 Series Spray and Grout Pumps
When you need more power to push through stiffer material, or you just need more volume, then look no further than the Step-Up 120 series of pumps. The IMER Step-Up 120 is a towable but very compact sized pump suited for very unique pumping situations and environments. These pumps are extremely versatile. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofings along with many other materials.

Model # 1106181 | 220V/60Hz, 7.5 HP,  Three Phase

TECHNICAL SPECIFICATIONS

STANDARD EQUIPMENT

  • Inverter Control panel
  • 66’ power cord
  • Remote control ready
  • 3 hp single phase 100% duty cycle motor
  • IM25L rotor/stator
  • Tow kit
  • Grate for premixed materials
  • Accessory toolbox

OPTIONAL EQUIPMENT

  • Dual diaphragm compressor – Part # 1107602
  • Non-towing wheel kit – Part # 1107633
  • Step up 120 pan mixer – Part # 1107596
  • Spin 30 continuous mixer with iDust grate – Part # 1106152
  • 33’ x 35mm hose – Part # 1107528
  • 50mm to 35mm material hose reducer – Part # 1106178
  • Vibrating grate – Part # 1107592
  • 120’ remote control – Part # 1107574
  • 2L6 rotor/stator kit – Part # 1107088
  • Spray gun 35mm male – Part # 1107577
  • Pintle tow ring – Part # 1107161
  • 5’ overhead wand – Part #1107549
  • 16’ x 35mm male to 25mm male hose – Part #1107074
Application Chart
Please fill out this form
so we can get 
you an
accurate quote.
Thank You 
Mighty Small 50
I'm interested in a Quote for the Following:
How did you find us? *

​STEP-UP 120A


Three Phase

SCREW PUMP FOR SELF-LEVELING AND GROUTS

Quietly Spray and Pump Large Volumes
Best described as a pure high flow material pump for self-leveling materials and non-shrink grouts. It’s designed to give 9.5 cubic yard per hour performance efficiently and quietly in restricted job site environments. Its sole mission is to pump large quantities of material through its high flow rotor/stator pumping system. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofing, and many other materials.

Model # 1106054  | 220V/60Hz, 3 Phase

TECHNICAL SPECIFICATIONS

STANDARD EQUIPMENT
  • Three-phase 220V/60Hz motor – 10 HP• Electric control panel
  • Built-in low voltage electric remote control with 120’ of cable
  • 66’ power supply cord
  • 60.12 rotor-stator• Vibrating grid
  • 33’ of 50mm hose (2 in)
  • Accessory box

OPTIONAL EQUIPMENT

  • Non-towing wheel kit – Part # 1107633
  • 33’ of Ø 35mm hose – Part # 1107528
  • 33’ of Ø 50mm hose – Part # 1107533
  • Grate for premixed material – Part # 1107569
  • 50mm to 35mm material hose reducer – Part # 1106178
  • Shotcrete gun – Part # 1106250
  • Pintle tow ring – Part # 1107161
  • 2L6 Rotor/stator kit – Part # 1107088
  • IM25L Rotor/stator kit – Part # 1107149
Application Chart
Please fill out this form
so we can get 
you an
accurate quote.
Thank You 
Mighty Small 50
I'm interested in a Quote for the Following:
How did you find us? *

​SILENT 300
PRESTIGE


PRESTIGE ECO T POWER

DIESEL POWERED SCREW PUMP FOR PUMPING AND SPRAYING

A Masterpiece of Pump Engineering in a Small Package
The Silent 300 Prestige is a diesel-powered multi-purpose pump and spray machine with a built-in 6.3 cubic foot hydraulic mixer and onboard compressor for spraying. The military spec control panel integrates all these functions in one location to allow operators to quickly and easily learn to operate the pump. Known for its versatility, the Prestige is designed to use different rotor/stator combinations for pumping a variety of materials – including up to 3/8” aggregate.

Model # 1106133 | 220V/60Hz | 24 HP Yanmar Diesel

TECHNICAL SPECIFICATIONS

STANDARD EQUIPMENT
  • 24 HP Yanmar diesel engine
  • 14 CF/m compressor
  • 2L6 screw pump
  • 2 clean-out sponges
  • High shear hydraulic mixer
  • Variable speed hydraulic pump
  • Programmable mixer timer
  • Metal accessory box
  • Tow package for highway use

OPTIONAL EQUIPMENT

  • 33’ of Ø 35mm hose – Part # 1107528
  • 33’ of Ø 50mm hose – Part # 1107533
  • Aqua Control Electronic Meter System – Part # 1107209
  • Vibrating grate – Part # 1107036
  • 164’ remote control – Part # 1107086
  • IM25L rotor/stator kit – Part # 1107149
  • 60.12 Rotor/stator kit – Part # 1107090
  • 50mm to 35mm material hose reducer – Part # 1106178
  • Spray gun step 120 – Part # 1107577
  • 16’ x 35mm male to 25mm male hose – Part # 1107074
  • Shotcrete gun – Part # 1106250
  • 5 Function radio remote – Part # 1107001
  • Hydraulic power washer – Part # 1107208
  • 5’ overhead wand – Part #1107549
  • Pintle tow ring – Part # 1107161
Application Chart
Please fill out this form
so we can get 
you an
accurate quote.
Thank You 
Mighty Small 50
I'm interested in a Quote for the Following:
How did you find us? *