CONCRETE MIXING TRUCKS

​Our machinery for concrete transportation and laying are capable of preserving the properties of concrete during the transfer phase from the concrete mixing plant to the worksite. Our truck mixer, truck mixer pumps, and conveyor belts are the results of consolidated know-how mastered during more than three decades of operation in markets worldwide. Our skills in outfitting vehicles of all brands allow us to achieve optimal performance levels while ensuring safety on the road and at the worksite. All the mixers are available in the “H” version driven by PTO on the chassis and on request, in the “D” version driven by the auxiliary engine. Thanks to the use of special wear-resistant steel, our mixers are also available in the “H SL” version (lightweight).

ORULT 8.7H

MOTION
By P.T.O. on the truck engine.
CONTROLS
By cable with control box
HYDROSTATIC TRANSMISSION
Variable displacement hydraulic pump
Fixed displacement hydraulic motor
Double stage planetary gearbox
Oil cooler with built-in oil tank, complete with cartridge filter with indicator and electric fan with thermostat

WATER SYSTEM
650l steel water tank with indicator.
LTI 30 water pump (450 l/min at 4 bar) driven by P.T.O. gearbox
500l water meter
D version (with auxiliary engine) available on request

OPTIONALS / VARIATIONS

Additional extension steel chute L=1000 mm
Additional short extension steel chute L=500 mm
Additional polystone extension chute (light construction) L=1000 mm
Additional short polystone extension chute (light construction) L=500 mm
Telescopic discharging chute LT 555 with funnel
Funnel chute ø195 mm
Hinged extension steel chute
Hinged extension Polystone chute (light construction)
Flap on discharging chute
Anti-wear protection sheet on feeding hopper
Anti-wear protection sheet on discharging chute
Vibrator on discharging chute
Half hydraulic drum cover
Full hydraulic drum cover
Hydraulic manometer with large gauge ø 65 mm placed at the rear
Hydraulic manometer with large gauge ø 100 mm placed at the rear
Water connection on two sides
Additional valve for water tank closing
Rear steel mud-guards and supports (one pair)
Rear aluminum mud-guards and supports (one pair)
Rear aluminum mud-guards with the smooth surface on

DATA SHEET

Nominal capacity 8 m3
Drum speed 0-14 rev/min
Unloading capacity 15” – 40”/m3 depending on a concrete slump
Weight (empty) 3.550 kg
Vehicle 6×4 – 8×4
Rollers n. 2 diam. 280 mm
Drum walls made of 30MnB5 anti-wear resistant steel – 200/220 HB (4mm thickness)

Mixing blades made of 30MnB5 anti-wear resistant steel – 200/220 HB (4mm thickness)

BOOMIX MIXING PUMPS

ORUBOOMIX M429

TECHNICAL DATA

Available with the following L&T mixers:

Truck mixer – nominal capacity: 7 m3
Truck mixer – nominal capacity: 8 m3
Truck mixer – nominal capacity: 9 m3
Pressurized water system with 650 l water tank

4 SECTION PLACING BOOM “M”
Special execution high tensile strength steel quality
Horizontal length : 24,700 m
Vertical height: 28,700 m
Pipes Ø: 100 mm
Delivery pipes made in HB 400 steel quality with 4,5” joints
3 m end rubber pipe

LONGITUDINAL CONCRETE PUMP SCP 60/55

Delivery capacity: 60 m3/h at 30 cycle/1’
Delivery pistons: Ø 200 mm
Pressure on concrete: 55 BAR
Stroke: 1.000 mm
The capacity of concrete hopper: 350 l
7” constant section “S” valve
Anti-wear plate: 700 HB
107 cm3/ring variable displacement hydraulic pump
The level sensor on the hopper
Safety hydraulic limit switch on hopper grid
Vibrator on hopper
Fold-out hopper for easy maintenance operations

CARATTERISTICHE

Remote control by radio (by cable as an option)
Hydraulic slew able front outriggers
Hydraulic rear outriggers
Supports plates for outriggers
Discharge chute hydraulically operated.
Toolbox
Horizon indicator
Rear working light
Manual greasing system for placing boom
Centralized greasing system for concrete pump
Mounting onto suitable 8×4 truck supplied by the customer equipped with P.T.O. on engine for the motion of the mixer and with double exit P.T.O. on gearbox for placing boom and concrete pump.

ORULT1201

Also available with LIFT ON- LIFT OFF ® system

The L&T Belt Concrete Conveyor is ideal in the building of foundations, small floors, and also concrete pillars and road work. It is an ideal means, both in functional terms (flexibility and versatility, even in severe conditions) and in economic terms.

LIFT ON- LIFT OFF ® SYSTEM

The disconnecting operation is completely hydraulic: once the circuit is shut off through cut-off joints to avoid oil leakages, the conveyor is separated from the machine by means of fast couplings.
The conveyor is also provided with suitable supports to hold and protect the conveyor from impacts or damage in the work yard. This system, patented by the Truck Mixer and Pump Department of the IMER Group, is extremely reliable and easy to use.

WHY CHOOSING L&T BELT CONCRETE CONVEYORS

The belt sliding chute avoids the concrete segregation
Cardanic conveyor for the easy distribution of concrete
Radio control with emergency stop and with integrated start-stop of the truck mixer motor
Conveyor belt support (during transport)
Swing out gear and releasable traverse
Rear bumper with sensor enabling the conveyor belt movement
Conveyor belt oil tank hydraulic unit

TECHNICAL DATA

Range of horizontal operation mm 11860
Max discharge height * mm 6700
Discharge capacity m3/h 45
Speed of belt m/sec 0 – 3
Overall weight kg 1200

TRUCK MIXER

Nominal capacity m3 6 – 12
Axles 6×4 – 8×4
*depending on the consistency of the concrete

Please fill out this form
so we can get 
you an
accurate quote.
Thank You 

Concrete Mixing Trucks