Welcome to a new day for pumps. IMER’s diverse and wide range of pumps is even more versatile than ever before with our wide range of accessories for each and every machine. Every IMER machine has been carefully engineered to handle a multitude of applications, providing your operation more opportunity to use the pumps daily, increasing your ROI. Pumping of grouts, self-leveling underlayments, spraying fireproofing, mortar and stucco setup, low volume shotcrete are just the beginning of the applications IMER pumps were engineered to tackle – and to outperform competitive pumps that only handle one type of pumping application. Trust the brand with years of experience, engineering excellence, and superior quality.IMER Vertical Shaft Mixers are designed and engineered from IMER’s concrete division of batch mixers and can handle the most impossible of mix designs. Mix up to 3/8” aggregate and mix it dry. Used in many precast shops, job sites that require the mix of stiff mud for floor screed, refractory applications, or even mixing epoxy or fast set concrete for use on roadways.
Designed for use with preblended mortars, underlayments, grouts, and fireproofing. These pumps are ideal for applications that require continuous pumping or spraying in high volume.
Water is precisely controlled and measured then introduced into the mixing chamber to allow constant flow to the work area. Every bag will be consistent from start to finish with no cold joints.
Set the pump up once to set the proper water ratio and speed. Then, just keep feeding the preblended bags of material into the dry hopper. The cement and water ratio is automatically blended and sheared and the material being mixed and pumped is perfect all day long.
Clean up is minimal as the hopper can remain full of dry material, ready for the next day’s work. The water booster cleans out the hose quickly with minimal mess. Just start up the pump the next day and you are ready to go right where you left off the day before.
Our continuous pumps can be found in most places where material needs to be mixed and pumped at a high rate of as well as high quality. IMER continuous pumps have set the standard on speed and performance.
All the motors on our pumps are 100% duty cycle which means that they can run all day, every day.
When it comes to spraying and grouting, IMER has you covered. We manufacture a wide range of grout pumps with lots of options to fit just about any need. From patching fireproofing to spraying shotcrete.
We offer many different configurations, such as continuous pumps, to diesel-powered piston pumps. Customize the pumps by adding attachments and accessories to suit your needs.
Our pumps are becoming the product of choice. It’s not just our products but it’s also our service and support that will keep you looking for ways to do more with our pumps.
When you need 3/4” concrete then look no further than the Booster 15. This pump was built to provide up to 20 cubic yards per hour of concrete or for shotcrete applications.
3 cylinder diesel engine provides maximum power to the pistons and “S” Valve for fluid constant pumping with minimal pulsation. 1000 PSI of pumping pressure ensures that long-distance pumping is possible.
Ideal for pumping concrete from ready-mix trucks, self-consolidating concrete, grouts, and shotcrete down to a low slump. An automatic greasing system is just one of the standard features you will find on the Booster.